How to Recover a Faulty Flash Drive through MS-DOS

Posted on

Defects within the pen drive are fairly frequent. Some of the frequent will not be having the ability to open the drive by connecting it to the pc, even by viewing through the file supervisor. Luckily this failure might be mounted through MS-DOS, which is a bonus because it doesn’t require the set up of different applications and nonetheless works for any model of Home windows.

It’s value mentioning that the process consists of formatting the drive, so it ought to solely be used if you don’t intend to get better the saved recordsdata. If so, comply with the ideas within the following tutorial and find out how to repair a defective flash drive.

 

Step 1. Entry the Home windows Begin menu and kind ‘cmd’ within the textual content discipline. Proper-click on the icon that seems in “Packages” and selects ‘Run as administrator’;

Step 2. Enter the command ‘diskpart’ and hit ‘enter’. Wait a few seconds till the ‘DISKPART>’ line seems;

Step three. Enter the command ‘listing disk’ and press the ‘enter’ key. An inventory of all of the drives linked to the pc (on this instance, the HD, and the pen drive) shall be displayed;

Read also:  How to Spot Fake and Scammy Amazon Sellers

Step four. Now enter the command ‘choose disk’ adopted by the quantity that seems subsequent to your pen drive within the listing. On this tutorial, the entire command is ‘choose disk 1’, as a result of the pen drive was listed on disk 1 (1900 MB);

Step 5. The immediate will show a message that the disk has been chosen, after which return to the ‘DISKPART>’ line. Then kind ‘clear’ and provides ‘enter’;

Step 6. Now insert the ‘create partition main’ command and press ‘enter’ to create a partition on the pen drive;

Step 7. Kind ‘format fs = fats32 fast’ and provides ‘enter’. The command will do a fast formatting in your pen drive, utilizing the file system FAT32;

Step eight. Kind the ‘assign’ command and press the enter key. With it, you’ll be able to change the drive letter related to the pen drive sooner or later;

Step 9. To complete, kind ‘exit’ to exit the ‘diskpart’;

Your flash drive is now mounted and may now be learn from the PC once more.

قالب وردپرس

Leave a Reply

Your email address will not be published. Required fields are marked *